Schwalbe Marathon Plus 20x1.75 (47-406) HS440 Tire - The Marathon plus tire has a thick protective liner to keep foreign objects from reaching the tube. Schwalbe has a protection level 7 out of 7 for all Marathon Plus tires. This is our most popular tire by far because it's affordable and they will outlast any tire out there. You'll be surprised at how smooth and quiet they roll.
SunLite Locking Brake Lever Set - These locks act as parking brakes and replace having to use parking straps. Forget worrying about your trike rolling away, especially with two locking brakes instead of just one.
Catrike Chain Tube Assembly - The stock Catrike chain routing uses low-friction PTFE tubing to guide the chain around the cruciform section of the frame. The ends of the tubes are flared for quiet and smooth running.
SunLite Clipless Pedals - -Forged alloy body
-Shimano SPD compatible
-Flat side with rubber insert for traction
-Toe clip compatible on non-SPD side
UTCustom Super Mounts (pair) - Black Anodized Clamp - Our Super Mounts get your mirrors out where they are the most useful. Our custom clamp allows the mounting bar to be positioned anywhere along the handlebar and adjust the angle. Works especially well with the larger tires found on our Catrike Annihilators and KMX K90 models.
Utah Trikes Rack with Catrike Mounting Hardware - Our custom adjustable rack comes with the clamps you need to connect it to any of the Catrike models. It fits on 20-inch models like the Catrike Villager and Trail and also on the larger models like the Expedition and the 700, allowing you to carry up to 65 lbs of extra cargo!
PLEASE INFORM US IN CUSTOMER MESSAGE WHAT CATRIKE MODEL THE RACK WILL BE INSTALLED ON
Catrike Standard Boom 19in Long - Anodized Black - Catrike's boom design is second to none! Their patented boom features a top slot to help keep the boom straight. The black anodized boom now features index marking making it easier to set the leg length consistently when sharing a trike.
Sunlite Turn Signal and Taillight - The Sunlite Turn Signal and Tail Light is equipped with 9x bright LED diodes. Right and left signals are triggered with a small thumb button, and turned on by holding both at the same time. Installation and use are simple, and its tail light runs during operation so you're always visible. Mount the signal triggers to your handle bars, fasten the light to your seat post, and your bike or motorized bicycle can let riders and drivers know where you're headed!
9x Bright LED Diodes
1x 2 in 1 Wired Turn Signal + Rear Light
2x CR2032 batteries
All Necessary Mounting Hardware