Fall Store Hours: Mon-Fri 9-6 (MST), Sat 10-4, Closed Sun. | 40 S Main St., Payson, UT 84651
Call or email anytime for quick response: Toll Free: 866-446-2065 | Local: 801-804-5810 | trikes@utahtrikes.com
  
|
Trice Rear Carrier for 20" suspension models
6061 T6 Alloy rear carrier with quick release mounting kit. This carrier is made to our design and has some great features making it a highly practical addition to your trike. It is designed to work with the standard Trice folding rear suspension and so is cantilever mounted with two QUICK RELEASE levers making it easy to remove before folding or just easy to fit or leave off for any journey (keeping weight to a minimum at all times). The carrier sides allow the bags to be mounted low down and keep them clear of the rear swing arm. The top surface of the carrier is wide providing a stable platform and the rear face has multiple mounting options for fixing up to 3 rear lights. The carrier is supplied with a Green (harder) Elastomer for the rear suspension which will be appropriate for most people when the carrier is heavily loaded. Please note that the Trice comes with a rear reflector mounting for the seat rails which can alternatively be used for fixing a rear light. If the optional neck rest is fitted then this also comes with a mounting point for a "seat post" fixing rear light. Picture shows optional fender. Max recommended carrier load 25Kg. Weight: 2.25 lbs (1020g) (Out of Stock)
Share your comments below:
|
UtahTrikes.com is a wholly owned subsidiary of Guy Graphics, Inc.
Copyright © 2006-2009 All Rights Reserved.
Materials on this site may not be used without express written permission.