Utah Trikes - Shimano Capreo 9-26 9-speed Cassette

Spring Store Hours: Mon-Fri 9-5 (MST), Sat 10-4 , Closed Sun. | 40 S Main St., Payson, UT 84651
Call or email anytime for quick response: Toll Free: 866-446-2065 | Local: 801-804-5810 | trikes@utahtrikes.com

2010 WILL BE THE YEAR OF THE TRIKE! GET YOUR TRIKE EARLY TO AVOID THE RUSH!

Sitemap

Product Category: Catalog -> Drivetrain View all Utah Trikes products
Shimano Capreo 9-26 9-speed Cassette

Price: $79.95
This item is currently in stock!

Quantity:

This is the replacement cassette for the Capreo hub and also the ICE custom 20-inch hub. This cassette will NOT fit on a standard hub.

Share your comments below:
what is the gear inch range for this hub compared to the 11/32 hub using the same schlumph drive
Posted by Lee in Vegas
10/05/2009 07:41:32 PM

Your current gearing (Schlumpf HSD w/11-32) is 16-115 gear inches.
Keeping the HSD and switching the rear to the Capreo will give you 19-140 gear inches.
Posted by Ashley

The 9,10,11,13T part of this cassette really kicks the hi end up,however the low end suffers. Replacing the lower 5 gears with the gears from a standard Shimano(11/34) cassette. (16,21,24,28,34)really makes this wheel set a winner for going up the local hills and a blast going down them.
Posted by Lee in Vegas
10/17/2009 04:21:55 PM

Comments:

Nickname:

E-mail (not published):

All comments are moderated by Utah Trikes staff. We reserve the right to remove or edit any comment that we deem to be inappropriate. After you add your comment it will not immediately appear until a moderator has read it.

Other Items you may be interested in:

110BCD 5-Hole Chainrings
$17.95

Ride2 Crank Arm shorteners for up to 43mm wide 9/16 arms
$99.95

RPM 46T Crankset with integrated guard
$24.95

Trice Chain Ring Guard
$49