![]() ![]()
|
Catrike Neck Rest
-Laser Cut and CNC machined adjustable neck rest -Stainless Steel hardware -Close/Open cell bonded double foam -Alloy spacers -Stainless limiter -Alloy CNC machined, hinged, proprietary clamps -Nylon shim to avoid frame scratching -It fits on all Catrikes seat top bar. Note: This is the Catrike's new patented headrest, which features more adjustability and a bigger head pad.
Share your comments below: What size tub is the neck rest designed to attach on to? Posted by Frank 02/18/2009 12:36:01 PM What are the chances of this fitting on a Zoomer. Much nicer looking than the Terratrike model Posted by Northwoodstriker 03/25/2009 07:06:48 AM The Catrikes have a bar along the top of the seat which the neckrest attaches to. The Zoomer bar is about 6 inches down from the top, so the Catrike neckrest will not work on the Zoomer. can this be adapted to a Sun tadpole trike? Posted by Ed 05/05/2009 03:36:42 AM If the trike has a horizontal bar on top of the seat it should fit. will this fit a typhoon KMX Posted by triker 08/22/2009 11:02:23 PM Yes. It will. Does it fit the thyphoon KMX with the factory fender on ??????? Posted by Pepe 05/09/2010 08:29:04 AM Yes It will only fit on the KMX if you cut the fender though. Posted by KMXTornado 07/02/2010 12:16:28 AM If you are using the KMX basic clamp on mudguard that is true. If you are using the KMX full mudguard set you will not need to cut the fender.
|
UtahTrikes.com is a wholly owned subsidiary of Guy Graphics, Inc.
Copyright © 2006-2009 All Rights Reserved.
Materials on this site may not be used without express written permission.