Fall Store Hours: Mon-Fri 9-6 (MST), Sat 10-4, Closed Sun. | 40 S Main St., Payson, UT 84651
Call or email anytime for quick response: Toll Free: 866-446-2065 | Local: 801-804-5810 | trikes@utahtrikes.com
  
|
Seat Riser Kit for TerraTrikes
The Utah Trikes seat riser kit includes the following: QTY 1 - Seat Riser Block QTY 1 - Extended Seat Stay Rods QTY 2 - Bolt and Nut We have four different types and sizes of the Seat Riser available depending on how high you want the seat to go. We now have a slotted riser for easy adjusting and fine tuning capabilities. The four inch riser will bring the seat to 16 inches. The 2 inch riser brings the seat to 13.5 inches. Please note: Only the 4 inch seat risers come with new stays. All of our seat risers are made from a high grade light weight aluminum, and are TIG welded for sure streangth and stability. Our 4 inch riser will allow you to move the seat forward about 2 inches above the handlebars, which is great for shorter riders. Our 2 inch riser will allow the seat to be moved backwards about 2 inches for the taller riders. Our Seat Riser Kit has been designed to be used specifically for use with the chromoly framed indirect/linkage steering model TerraTrikes. The base of the riser uses the two seat holes found on the chromoly frames. The Seat Riser Kit will work with the aluminum models that use indirect/linkage steering with just a single bolt. Our Seat Riser Kit is NOT compatible with the Zoomer or Edge model TerraTrikes. Note: Our seat riser kit will change the center of gravity and handling characteristics of your trike. For faster riders we do not recommend the seat riser because of the possibility of tipping at high speed.
|
UtahTrikes.com is a wholly owned subsidiary of Guy Graphics, Inc.
Copyright © 2006-2009 All Rights Reserved.
Materials on this site may not be used without express written permission.