Utah Trikes - Promax Locking Brake Lever

Fall Store Hours: Mon-Fri 9-6 (MST), Sat 10-4, Closed Sun. | 40 S Main St., Payson, UT 84651
Call or email anytime for quick response: Toll Free: 866-446-2065 | Local: 801-804-5810 | trikes@utahtrikes.com

GET YOUR TRIKE NOW WITH ZERO DOWN/ZERO INTEREST FOR 18 MONTHS THRU FEB. ASK FOR DETAILS.

Sitemap

Product Category: Catalog -> Brakes View all products
Promax Locking Brake Lever

Price: $14.95

The Promax brake lever set includes one standard brake lever and a locking brake lever. The lock acts as a parking brake. Just press the button and you won't have to worry about your trike rolling away. This eliminates the need for the velcro strap parking brake that comes standard with all our trikes. We will install these on new trike orders ($5 charge) or if you already have your trike you can install it yourself.

This is one upgrades that will really make a difference to the every day rider. All the WizWheelz trikes come with velcro strap that is used to set the parking brake. It's easy enough to use, but eventually you are going to misplace the strap. This locking lever is easy to use and makes parking your trike a breeze.

Installation steps:
1. Disconnect the left brake cable by unscrewing the adjuster all the way. Once the cable adjuster is off slide the cable through the slot and pull the end out of the lever housing.
2. Remove Rubber grip from steering bar. This grip is just squeezed on so it may take some twisting and pulling.
3. Use an allen wrench to loosen the shifter from the steering bar. Once it is loose enough to rotate freely slide the grip up and off the steering bar.
4. Use an alen wrench to losten the brake lever. Once it is loose slide it off the steering bar.
5. Slide your new locking lever down the steering arm. Do not tighten it yet.
6. Slide the grip shifter back on the steering bar. Do not tighten it yet.
7. Slide the rubber grip onto the steering bar. Make sure that it is pushed all the way down.
8. With the rubber grip in place, slide the shifter into position and tighten it with an allen wrench.
9. Pull the new locking brake lever up until it touches the bottom of the grip shift. Rotate it so that it will be comfortable for you and tighen it with an allen wrench.
10. Remove the adjuster from the bottom of the brake lever and slide the brake lever through the slot.
11. Slide the end of the cable through the brake lever and pull the cable down through the bottom.
12. Screw the adjuster back in to the bottom of the brake lever and adjust as necessary.

Pictures coming soon.

Other Items you may be interested in:

No results were found