![]() ![]()
|
Steering Upgrade for Linkage Steering TerraTrikes
Share your comments below: Does exactly what it is supposed to do. I had to enlarge the aft two holes to 5/16. I replaced the two bolts with slightly longer round headed bolts to ensure two threads show past the nylon on the locknut and to match the other hardware. As a steering realignment is necessary I recommend you remove the tie rod ends, clean off the dissimilar metal corrosion and apply some anti-seize lubricant upon reassembly. Posted by Lee in Vegas 08/20/2009 04:48:49 AM Will this motification void the warranty of the frame. Also will it make the steering more sensitive. Posted by Scott 08/28/2009 12:21:33 AM Although it will not affect the frame structurally if done properly, I'm sure that TerraTrike would not cover the frame if damage occurred because of it. Any trike bought through us and modified by us will be covered through us. Does this modification make the trike more 'twitchy' at high speeds or is it relatively the same. (35 mph +) Posted by Jason 09/02/2009 06:27:25 AM It does make the steering a little more sensitive, but does not affect the high speed handling. You should note that this modification will not work with the seat in the full forward position. The linkage does not clear the seat frame. Posted by Kurt 01/03/2010 12:30:22 AM Yes, thank you.
|
UtahTrikes.com is a wholly owned subsidiary of Guy Graphics, Inc.
Copyright © 2006-2009 All Rights Reserved.
Materials on this site may not be used without express written permission.